Standard units
1) Automatic Belt suction
feeder;
2) Pre-creaser and creaser
(3,5ply);
3) Wheel gluing
system;
4) Up folding beams with auto correction device for
fishtail problem;
5) Squaring device;
6) Long Pressure
conveyor unit;
7) Counter Ejector;
8) Motorized
adjustment system;
Technical
parameters
|
Model
|
AFG-LPC-1200x2000
|
AFG-LPC-1200x2400
|
|
Power consumption(Voltage, HZ)
|
380V or 415 V, 50HZ, 3 phase
|
380V or 415 V, 50HZ, 3 phase
|
|
Max. carton box (L x W)
|
500x500x500x500
|
600x600x600x600
|
|
Min. carton box (L x W)
|
120x120x120x120 ( mini beam)
200x200x200x200 (big beam)
|
120x120x120x120 ( mini beam)
200x200x200x200 ( big beam)
|
|
Paperboard thickness
|
2-9mm
|
2-9mm
|
|
Glue width
|
??45mm
|
??45mm
|
|
Feeding mode
|
Suction belt feeding
|
Suction belt feeding
|
|
Max. paperboard (L x W)
|
1200x2400 mm
|
1200x2400 mm
|
|
Min. paperboard (L x W)
|
250x550mm
(small beam)
300x800mm
(big beam)
|
250x550mm
(small beam)
300x800mm
(big beam)
|
|
Forming mode
|
Up folding
|
Up folding
|
|
Total power (KW)
|
28
|
28
|
|
Working speed pcs/min
|
80-150 (by size and quality)
|
80-150(by size and quality)
|
|
Machine dimension
|
18000x2800x1100
|
18000x3500x1100
|
Functions descriptions:
A.Automatic belt suction
feeder
1. Manual adjustment of left/right board
and front gate gap.
2. Second pre-creasing and
creasing unit.
3. Motorized adjustment of
roller gaps.
B. Wheel gluing unit
Wheel-gluing system. Gluing tank can be
motorized adjustment to left and right direction.
C.Up
folding unit
1.Main folding belt is
imported from Italy, high quality, durable.
2.Upward folding avoids
glue flow to the ground.
3.Motorized movement of
the left/right folding beams.
4.Side guide device on
both folding beams to make the creased paperboards go straightly in a linear
way;
5.There seated auto
correction mechanism on the folding beam to remedy the fishtail problems.
D. Squaring device
1.To square all the folded cartons for an acceptable
accuracy.
2.Equipped with
air-knife mechanism to send the down-dropping cartons to the correct position.
E. Long Pressure Conveyor Unit
This
unit is to give pressure on the folded cartons between the running conveyors to
guard against off-glue problems, especially against the thick, hard and
deformed 3 or 5 ply corrugated paperboards.
F.Counter Ejector
Bundles will be
automatically ejected out when reached a certain quantity.
F.Consumable parts
photocell sensor, belts
G.Sources
of main parts
1. Main
motor Taiwan Debang
2. Main
electrical parts Sneider
3. Main
bearings Japan
4. Main
belts Italy and Korea
|
