Standard units

1) Automatic Belt suction feeder;

2) Pre-creaser and creaser (3,5ply);                        

3) Wheel gluing system;    

4) Up folding beams with auto correction device for fishtail problem;          

5) Squaring device with simple pressure conveyor;

6) Counter Ejector;

7) Motorized adjustment system;

Technical parameters

Functions descriptions:

A.Automatic belt suction feeder

1. Manual adjustment of left/right board and front gate gap.

2. Second pre-creasing and creasing unit.

3. Motorized adjustment of roller gaps.

B. Wheel gluing unit

 Wheel-gluing system. Gluing tank can be motorized adjustment to left and right direction.

C.  Up folding unit

1.Main folding belt is imported from Italy, high quality, durable.

2.Upward folding avoids glue flow to the ground.

3.Motorized movement of the left/right folding beams.

4.Side guide device on both folding beams to make the creased paperboards go straightly in a linear way;

5.There seated auto correction mechanism on the folding beam to remedy the fishtail problems.

D. Squaring device with simple pressure conveyor;

1.To square all the folded cartons for an acceptable accuracy.

2.Equipped with a simple pressure conveyor mechanism to guard against off-glue phenomenon.

E.Counter Ejector

Bundles will be automatically ejected out when reached a certain quantity.

F.Consumable parts:

 photocell sensor, belts

G.Sources of main parts

 1. Main motor                  Taiwan Debang

 2. Main electrical parts            Sneider

 3. Main bearings                 Japan